Order Form 0 Testing Strips: Fill & Download for Free

There is a lot more to it than just taking a homeopathic medicine. Not being a homeopathic physician, I am not familiar with the types of medicines used. But in all holistic medicine, the approach to illness is to treat the whole person and not just the presenting symptoms of the disease. Homeopathic practitioners select homeopathic medicines according to the total picture of the patient, not just based on the physical symptoms, but lifestyle, mental and emotional state, stress levels, diet, family history and other general factors in order to prescribe the best medicine remedy. Homeopathic treatments are highly individualized. Two people with gout are treated as distinct individuals, each are uniquely influenced by the many factors mentioned above, with each patient being prescribed a remedy that matches their symptoms. To look at the whole picture we need to understand what causes gout and then factor in the individual patients lifestyle.As you probably already know Gout is a medical condition, which is characterized by recurring attacks of acute inflammatory arthritis and acts out as a red, tender, hot, swollen joint. It is caused by the bodies elevated levels of uric acid in the blood. The uric acid crystallizes, and the crystals deposit into our joints, tendons, and often surrounding tissues.Urate crystals can form when there are high levels of uric acid in our blood. Our bodies produce uric acid when it breaks down purines. In other words, it forms when chemicals called purines break down. Purines are a natural substance found in the body as well as many foods such as liver, shellfish and alcohol. What is supposed to happen is that the purines get broken down to uric acid in the blood and the body expels it through urination or a bowel movement. In other words, the uric acid is supposed to dissolve in our blood and pass through our kidney’s into our urine. Unfortunately, for some people their bodies will produce to much uric acid or the kidney’s don’t excrete enough uric acid. So, when this happens, uric acid builds up, and causes sharp needle like urate crystals in the joints and it causes a lot of pain, inflammation and swelling.So, here is what I know to be a big factor in healing gout permanently. Our bodies have to maintain a natural alkaline balance because that allows the uric acid to become more soluble and easier to flush out of our kidney’s.I have my patient’s start by mixing ½ teaspoon of baking soda in an 8 oz. glass of distilled water 3 to 4 times a day for 5 days. While my patient is doing that I start working on educating them regarding the importance of eating a more alkaline diet. But you don’t want to be complete alkaline either. For example: Cancer cells can’t live in an overly alkaline environment, but none of our other cells can live in it either. Ultimately we want to aim for our blood to be slightly alkaline.The difference between alkaline and acidic is that pH of 0 is totally acidic, while a pH of 14 is completely alkaline. Whereas a neutral pH will be between 7.35 and 7.45.My best advice is to go on Amazon and order the pH test strips for testing alkaline and acidic levels in the body. You want to purchase the one that test either your urine of saliva or both. This is where you have to start to get your gout and any other issues you are dealing with under control. I use the pH test strips by JustFitter for my me and my family and my patients.My husband was diagnosed with a severe case of acid reflux and they wanted to put him on prescription drugs for the rest of his life. I knew there had to be another way since it wasn’t a disease or life threatening. My research led me to study the acid/alkaline balance in our diets, and ultimately led me in the direction of holistic health. I changed our eating habits to a more alkaline diet and by adopting the alkaline lifestyle my husbands health improved and much to my surprise the need for prescription drugs was no longer an issue. You want your body’s pH level to be at 7.0, because anything below or above is going to have a huge effect on your overall body and health.While you’re waiting to get your test strips start researching alkaline diets to see where it can be the most effective. I guarantee you will be feeling on top of the moon in just a few short weeks.Good Luck, and feel free to email me if you have any additional questions.Twyla Shaw

Other guys have provided decent answers. So, I will take you to another path, from the point of view of the Indonesian state-owned arms manufacturer. It will be a long story. Please, bear with me.Indonesia has learned the hard way on the important role of the armored vehicle in combat, especially for transporting troops. During the early phase of military operations in East Timor (1978–1999), the ill-equipped Indonesian Army suffered from high casualty rates due to the lack of armored vehicles. There were many cases where troops rode in regular buses or trucks easily became the prey of the Fretilin guerillas, many of whom previously served in Portuguese Timor Army, who can aptly implement effective ambush tactic.A colonel in the Indonesian Army (TNI AD) once told me that the casualties during the occupation of East Timor reached almost 20,000 and it is believed that 3,000 soldiers were killed. This embarrassment should never again be repeated.After Indonesia left East Timor in 1999, then came the emergency situation in the most westernmost province, Aceh, which had been infested with Free Aceh Movement (GAM) insurgency that took arm for independence since 1976. After GAM leaders in Sweden refused the autonomy option following the death of local GAM commander in chief during the previous military operation, Jakarta in May 2003 declared martial law in effect in Aceh and the military operation on a scale never seen since invasion on East Timor was launched. Indonesia deployed more than 30,000 soldiers and 12,000 police officers and all of its military arsenals to Aceh to get rid GAM insurgents, led by charismatic Hasan Tiro from a comfortable home in Sweden, once and for all.However, Indonesia which had only become a democratic country after the 1998 Reformation following the Asian financial crisis, was not in good shape, both militarily and financially. The Army and Marines still lack the armored vehicles to form mechanized infantry that can prevent the morbid mistake the TNI did in East Timor by sending ill-equipped soldiers in light-skinned vehicles to the battlefields. Only special forces can enjoy the luxury of the armored troop carrier.To make matter worse, Indonesia was also under military embargoes imposed by the US and UK. The US’s embargo had kept most of Indonesian Air Forces (TNI AU)’s fleet of C-130 Hercules and F-16 aircraft fighters from regular operational flights due to lack of spare part. The British banned TNI AD from deploying the Scorpion light tanks and prevented TNI AU from using Hawk aircraft fighters to combat in internal conflict. TNI AD withdrew the much-needed Scorpions from Aceh.During the military operation in Aceh (2003–2004), our ground troops soon found out that they must improvise to survive the ambush in the jungle. They came up with this: coconut logs on the truck bed to stop the bullets…. some bullets maybe.Coconut log abounded but so did the GAM’s bullets spray. So, the more resourceful Army units can come with something like this:Luckily for TNI, GAM warriors were less skilled and resourced than Fretilin’s. However, with the increasing combat intensity, TNI leaders then asked PT Pindad (Army Industrial Company) to make armored troops carrier that can be built and deployed as quickly as possible. To give you a perspective, Pindad is known as the manufacturer of small arms and ammunition for TNI with additional portfolio in steel fabrication such as producing railway system components. However, at that time Pindad has no experience in manufacturing the armored vehicle. The closest thing it can do was servicing the Army’s tank.Upon receiving TNI’s request, Pindad’s engineers chose the simplest solution:The most prolific 4x4 truck in the army inventory: Isuzu NPSPindad’s engineers stripped the body of the 2.5-ton truck and then built the armored structure around the chassis. The result was this little beast that could: APR-1 V1APR stands for Light Armored Personnel Carrier that can transport up to 10 lightly equipped Indonesian personnel. Please bear in mind that we Indonesian have much smaller stature than the average Caucasian. Isuzu truck chassis was chosen for the ease of maintenance since all the spare parts are the same as the regular 4x4 truck in the civilian use, especially the mining sector.Pindad in early 2004 sent 26 units of the first model of APR-1 to Aceh for a field trial in a hope that it can be improved further. However, soldiers deemed the new vehicle suffered from lack of mobility and maneuverability due to the excessive weight as it still came with the standard power train and undercarriage. Realizing that further improvement will not be feasible in a short time, TNI scrapped the plan to acquire an additional 14 APR-1.Yes. APR1-V1 was far from a bold and good looking vehicle you wanna take on an afternoon ride. At least, Bangladesh Army has shown interest in this cheapest armored vehicle that only cost you less than US$ 55,000 a piece. Add more US$ 500 and you'll get a full air conditioner and probably stereo system.Then, the tsunami came, literally, in the fateful morning of 26th Dec 2004. Along with more than 200,000 lives of Acehnese that perished, TNI lost two APR-1s in the biggest natural disasters of the 21st century that eventually forced the two belligerents to meet in the peace negotiation table.After Acehnese returned to peaceful life, Pindad did not abandon its dream to develop the homegrown armored vehicle. The next development resulted in a bigger model called APS or Medium Armored Personnel Carrier.Pindad along with Agency For Assessment and Application of Technology (BPPT) in 2005 made two APS versions built from the same truck chassis. This time, they used 5 ton 6×6 Perkasa truck made by PT Texmaco Perkasa Engineering, the engineering arm of Texmaco Group, the former Indonesian industrial conglomerate which collapsed after being hit hard by the 1997-1998 economic crisis. The crisis had forced Srinivasan family to give up control of almost all assets under the Texmaco Group to the government, including Texmaco Perkasa’s factory in Subang, West Java.Perkasa PT44 truck with Leyland cab as the basis for APS APC. Powered by domestic made Austrian Steyr Puch diesel engine, the APS looked more promising.The first version of APS.During fierce combat in the middle of the jungle, what else can you expect than an armored limousine? the side sliding door made it the most elegance APC by far. For more conventional ingress and egress, you still can find a rear swing door. Ladies and gentlemen, Pindad APS-1 at your service to bring you home safe and sound!The second version of APS.Pindad and BPPT finally made their way to take APS's shape right in the second version. The APS-2 (or APS-1 V1) looks as normal as an APC could appear. No side sliding door from the first version. Troops are loaded up from the rear door. Pindad provided a more stylish way to enter the driver cabin: just open the hatch and jump in. Both version able to carry up to 13 average Indonesian soldiers.Realizing the capability of Pindad, TNI in late 2005 gave support for the next stage of APC development. This time, Pindad was tasked to build a real armored combat vehicle that then became known as Panser 0 Series. Indonesian uses the word “panser” to call every wheeled armored vehicle. The term most probably derived from the Dutch ‘pantser’ which also means armored vehicle (tracked or wheeled).Pindad was only given two months to build four prototypes that can be displayed on TNI’s 61st-anniversary ceremony on 5th October 2006 in Jakarta.Unlike her predecessor which using truck’s ladder frame chassis, Panser 0 Series was built on monocoque high strength composite steel body. Pindad developed the new APC by taking reference from French Véhicule de l'Avant Blindé (VAB). The then Pindad CEO Budi Santosa admitted that his engineers took a VAB apart in Pindad’s workshop in Bandung, West Java, to fully study it inside-outside.Rather than just copying or doing some reverse engineering from VAB parts, Panser 0 Series came up with different style. Budi Santosa said that Pindad developed a new suspension model which it claimed has better performance than VAB’s or so it seems. However, it retained the original VAB’s Renault diesel engine to power the Panser 0 Series.Sorry. I just paraphrased it. In short, Pindad copied VAB. Period.I managed to have a ride on both French VAB and Panser 0 Series to feel the difference. VAB bought by Indonesian Army was 4×4 wheel version, not the more expensive 6×6 wheel version. I noticed that VAB wheel can bend on its axle more flexible than Panser 0 Series’s, a useful feature on extreme uneven road. That’s why VAB has a more bumpy ride on the smooth tarmac. Pindad’s Panser on the other hand—thanks to its 6 wheels—drive more steady and firm. But I have no chance to test them off road.Pindad Panser 0 Series first displayed to the public during the TNI's 61st-anniversary ceremony on 5th October 2006 in TNI HQ in Cilangkap, Jakarta. President Susilo Bambang Yudhoyono after led the ceremony made a glance look from his presidential car as he passed by the Panser 0 static display.Renault VAB, from which Panser 0 Series was born, was acquired by TNI AD in the 1990s and became the backbone of TNI's Garuda Expeditionary Forces during UN peacekeeping mission in Lebanon (UNIFIL). We can notice the similarity and difference between the VAB and Panser 0 Series.I heard that Indonesia’s venture in developing its homegrown APC which modeled after the VAB had offended the French. Indonesian MoD officials then made an offer their French counterpart cannot refuse.Indonesia to produce Panser 0 Series by using the new diesel engine that Renault Truck will provide. After all, VAB was some 70s technology.Indonesian Peacekeeping Forces in Lebanon to buy 32 VABs from French Army inventory. The VAB will be refurbished and sent directly from France to Lebanon.The possible future partnership between Renault and Pindad in supplying armored system to TNI. This eventually resulted in the locally built Renault Sherpa light APC which in Indonesia being marketed as Komodo.The Panser 0 Series then developed and officially designated as APS-3 Anoa (midget buffalo native to Sulawesi). With government back up through state-owned banks financing, TNI ordered Anoa in large number. Up to 150 units were ordered in 2009.Beside regular APC, Pindad builds Anoa in several variants such as ambulance …Recovery vehicle4x4 model for Police force and a small number for TNI AD, probably for the scoutAnd, eventually, Anoa equipped with Alvis turret and Cockerill 90 mm low-pressure gun. The macho version was given name Badak (rhino)We can see that Pindad learned to develop and build APC incrementally, from up-armoring the small truck chassis, then moved to the bigger truck platform with two different variants to see which design is better suited for the would-be operator and eventually copied or reverse engineered the proven off-the-shelf design. All these development phases were financed by Pindad’s own coffers without financial support from the government or MoD/TNI.That is why Pindad can only able to build the dirt cheap prototypes for APR-1 and APS-1. APS-1 was reportedly cost less than IDR1 billion ($100 k) per unit. After given guarantee from TNI that it will buy the next product iteration, Pindad was willing to spend billions of rupiah (hundreds thousand of a dollar) to develop Panser 0 Series. Financial support from state-owned banks only came after TNI put firm order for Anoa APC. The loan from the banks was used by Pindad to jump-start the Anoa manufacturing line.TNI acquires Anoa APC in large number not only to replace hundreds of old APCs bought more than 50 years ago such as trio British Saracen, Saladin, and Ferret; but also to build mechanized infantry units in the future. This acquisition will not only provide a boost to Pindad to develop a more advanced armored system but also enhance its engineering and manufacturing capabilities. With less attractive remuneration it can offer to compare to the private sector, Pindad previously unable to attract the best talent from the best universities in Indonesia. It can only hire ‘mediocre’ engineers.However, you don’t need the best engineer to develop and make something that just works decently. I remember a lecturer in college once said something like this about aircraft maker Boeing. “The top engineers created B-757. The mediocre engineers created B-737.”The former was an engineering marvel that could fly gracefully. The latter, however, eventually became the most successful jetliner in history.Pindad’s engineers who have gained precious experiences from APR-1 to Anoa project eventually became experienced and skilled engineers and they can always get help from the best scientists that Indonesia can muster from both BPPT and Bandung Institute of Technology (ITB) to assist them during the project development phase. Combine it with financial support from the government and a well thought out long term development masterplan, one can assure that for Pindad to build a tank is just a matter of time.Indonesian government at least since 2009 started to fund the weapon system development project which includes medium tank project. The first phase of development was for defining the needs and probably early design. What is the weight threshold? What type and size of the gun to be installed? How are the engine layout and power rating?Realizing that the armored tracked system is a very different beast from wheeled APC, Pindad sought outside help. Pindad chose Turkish FNSS as the partner and both parties in 2015 agreed to jointly develop what would become the Modern Medium Weight Tank project which resulting in Kaplan MT tank for Turkey and Harimau (Tiger) tank for Indonesia. The development phase mostly took place in Turkey with the Harimau prototypes were sent to Indonesia in 2018 for field trial.Weighing up to 35 ton and equipped with 105 mm Cockerill high-pressure gun, the Harimau medium tank will replace 314 units (from originally 400 units) of AMX-13 tank currently fielded by TNI AD. The French light tank was first bought in 1963 and had been undergone several upgrades.The medium tank project is another milestone for Pindad: joint development program. The next milestone would be producing it in large number by maximizing the local resources and in the most efficient way. In this regard, Pindad cannot do it alone.There are only a handful of heavy engineering companies in Indonesia which can provide the technology and expertise to Harimau manufacturing. Texmaco Perkasa Engineering which produces Perkasa truck for APS-1 is the only local company with precision manufacturing capability that can contribute to Harimau production. The others are heavy industry companies in Indonesia which are owned by Japanese and European investors. Pindad reportedly has asked one of them to manufacture turret ring of Harimau tank.One may wonder. What is next after Harimau? Would it be possible for Pindad to develop and built main battle tank? Indonesian government currently has no intention to move further from the medium tank project. Instead of expanding its portfolio, perhaps what is best for Pindad right now is deepening its expertise to support its current offerings, such as licensed production of large caliber ammunition and weapon system that can be used for TNI’s new mechanized infantry and cavalry divisions.That’s all. I hope it helps…PS: I will try to keep updating or revising the article

Fish aren't mindless drones like previously assumed: they are sentient, have emotions and feel pain. This makes things like overcrowding and improper care cruel and inhumane. I’m an affectionate fish keeper, I form bonds with my fish and constantly have my arms in the water, often hand feeding or outright petting some of them (with their consent/preference, mostly they just swim against my hand or arm, I have had a few strangely cuddly ones that liked being held) no luck with invertebrates, my shrimp always hid, crabs and crayfish were exactly like finding Nemo crabs (jerks)Find out the maximum size of fish before you bring them home, when fish start getting too big for aquariums the water becomes toxic and harder to maintain. the old saying fish don't get bigger then the aquarium is true in the sense that it's physically impossible, but it stunts their growth, from experience usually not their organ growth, it makes them look like horrifying mutants and without intervention they die of medical complications caused by that (if you can keep the water clean, otherwise they die of toxicity). A general rule of thumb is 1″ of fish (use max size of fish) per gallon of water, this rule only really applies to small-medium tropical fish and includes bottom feeders/invertibrates. If you go with larger fish or goldfish (or territorial semi-aggressive species aim for 1″ per 2+ gallons.Look for compatible fish, similar size, similar behaviour, ect. There are 3 levels in an aquarium: 1) fish that stick to the surface, 2) fish that occupy the middle, and 3) bottom dwellers. They don't always stay in their designated area, so again compatibility.Water conditions, bacteria and cycling aquariums: bottom feeders don’t eat poop, poop and waste food ect rots like everything else, this creates nitrate and nitrite which turn into ammonia and is toxic, especially in high quantities. These toxic chemicals are eaten by bacteria, which aren't immediately present in new aquariums and require a food source to grow and thrive. When starting an aquarium, it is a good idea to get a head start on bacteria (some fish stores will give you a bag of dirty water) or add a few fish at a time and slowly. It is imperative to test the water frequently (daily or every other day) either by bringing samples to petstore or buying test strips or a kit(kit is best, strips are often inaccurate) if you start by adding fish, nitrite and ammonia should be 0, if higher, change 1/3 of the water daily until back to 0, nitrate is less toxic and not an emergency in low doses, but don't confuse less toxic with non-toxic. Nitrate turns into nitrite then ammonia, so if your nitrates are high, you're likely about to have an ammonia spike and should intervene.The larger the aquarium, the easier to keep. Not just because you have more options, but water conditions changes happen more slowly in larger quantities of water. If you put a drop of bleach in a shot glass, it's more harmful then putting a drop of bleach in a bathtub. One tiny fish poop will produce the same amount of toxic chemicals when it rots in a small aquarium as a large one.Algae eaters rarely only eat algae, plecostomus (most commonly available varieties grow around 1′–3′) and usually only wants algae as babies, then go omnivorous and without meaty food available will go for fish, also most plecomstomus variety should have driftwood. Chinese algae eaters are semi-aggressive and will eat small fish. Almost all fish will eat or attempt to eat anything they can fit in their mouth, including tails/fins, smaller fish, bugs/invertibrates, things that fall in the water. Even suckerfish/algea eaters, vegetarian. If you don’t feed bottom feeders, (even friendly otherwise harmless algae eaters when there is algae present) they're likely to hog fish food or outright attack fish. No algae eater eats every kind of algae.Chemicals and additives: this will depend on your local water source, most water has chlorine or chloramine in it, your local petstore can tell you, I use prime water conditioner because it is the best for my area. Water conditioners with other additives such as stress reducers are usually unnecessary and more expensive with little to no difference. Everything else you test for such as PH and water hardness will depend on which fish you choose and can be adjusted. Personally, I prefer less chemicals and fish that are happy with my local water (minus the chloramine), my water is typically hard, and if I chose fish that required softer water, I would have to constantly soften my tap water and I find things like that annoying, but it is a preference.Cleaning: have a good filter, change 25–30% of the water weekly (never all of it!), don't overfeed fish, keep your filters in good working order and clean. Clean decor and glass as needed, if you need to use chemicals use bleach and water (not on live plants and not inside the aquarium) and then use de-chlorinator to remove the bleach BEFORE putting back. Easy.